ADVERTISEMENT
 
Manage your search for products, compare companies, request product information and download industry-related research, for free - a must-have resource.

Centrifan™ RE Recirculating Evaporator

Available from Modular SFC, Inc.

Centrifan™ RE Recirculating Evaporator
Dry Samples Faster than Vacuum or Blow Down Solutions

No vacuum pump required to dry fractions faster than benchtop vacuum centrifuges or blow down concentrators.*
Save energy, laboratory space,...Read More
Dry Samples Faster than Vacuum or Blow Down Solutions

No vacuum pump required to dry fractions faster than benchtop vacuum centrifuges or blow down concentrators.*
Save energy, laboratory space, and maintenance headaches by
eliminating the need for vacuum pumps
Eliminate oil mess, heat, noise and vacuum tubing
Set temperature up to 60°C
Programmable heater shut-off time
Use storage/media bottles, microtiter plates, tubes or scintillation vials
*all evaporation rates were obtained while connected to a -50 degree C cold trap (cold trap is available separately).

Operates at Atmospheric Pressure
The Centrifan RE operates at atmospheric pressure and replaces typical vacuum centrifuges or blow down concentrators. Using only heating fins within the rotor compartment and the spinning rotor, the Centrifan RE provides a simple and effective evaporation environment.

Accommodates Standard Collection Vessels

4 or 8 (250 mL) media bottles
24 (20 x 150 mm) test tubes
24 (13 x 100 mm) test tubes
4 (96 well) microtiter plates
24 (20 mL or 40 mL scintillation vials)
6 x 0.3L wide mouth bottles

More Products from Modular SFC, Inc.

Available from: Modular SFC, Inc.
The Centrifan PE Personal Evaporator combines the features of a centrifuge and a blow-down evaporator. No vacuum pump is required. Its inherent simplicity means it will run for many years with no...Read More
Available from: Modular SFC, Inc.
Collect more SFC fractions with HPLC-like convenience
Collect up to 24 fractions at atmospheric pressure
Dry fractions while collecting
Use standard glass collection tubes, bottles,...Read More
Available from: Modular SFC, Inc.
Combine collection and drying into a single step

Use stacked and multiple injection collection modes
Eliminate carryover
Increase purity and recovery
Control via CFC-PC™...Read More

Related Research You May Be Interested In

Using mass flow controller-based dynamic gas blenders to produce accurate calibration gas
Mass flow devices, developed in the 1960’s, are critical components is systems that produce the specialty gas standards required to calibrate a wide variety of instruments...Read More
By: Environics Inc. | Published: 11/11/2011
Direct Steam Injection Hot Water Systems For Jacketed Heating
This article takes an in-depth look
at the advantages and disadvantages of steam and hot water for jacketed heating, and compares indirect and direct steam injection systems...Read More
By: Pick Heaters, Inc. | Published: 9/13/2011
ADVERTISEMENT