ADVERTISEMENT
 
 

Centrifan™ AF Recirculating Evaporator with Auto-Fill

Available from Modular SFC, Inc.

Centrifan™ AF Recirculating Evaporator with Auto-Fill
Improve productivity over traditional rotorvap concentrators
No vacuum pump required - prevents risks of sample loss or contamination; eliminates oil mess and downtime from pump accessory...Read More
Improve productivity over traditional rotorvap concentrators
No vacuum pump required - prevents risks of sample loss or contamination; eliminates oil mess and downtime from pump accessory
Increased user safety – no fragile glassware with implosion risk
No inconvenient water bath
Blow-down of liquid fraction solvent means no pre-freezing for subsequent lyophilization
Choice of inert recirculating blow-down gas; consumption of nitrogen or argon is negligible
Centrifuge-like operation (samples in spinning rotor) assures no loss of sample, even at complete dryness
Unattended operation - self-refilling of collection containers as evaporation progresses
Portable, self-contained unit requires no bench space or fume hood
Environmentally friendly - uses cold trap to recover evaporated solvent vapors
The Centrifan™ AF is a Recirculating Evaporation™ system with a unique Auto-Fill capability that allows unattended operation and provides significant advantages over traditional rotorvap concentrators. The system employs centrifuge-like operation and uses novel recirculating evaporation of a trapped gas volume to blow-down fraction solvent. The system functions without a vacuum to prevent sample foaming, bumping, freezing or contamination risks typically associated with vacuum type rotorvap concentrators. The Auto-Fill mechanism (patented pending) automatically determines when to replenish liquid in the evaporating sample containers while they continue to spin.

More Products from Modular SFC, Inc.

Available from: Modular SFC, Inc.
The Centrifan PE Personal Evaporator combines the features of a centrifuge and a blow-down evaporator. No vacuum pump is required. Its inherent simplicity means it will run for many years with no...Read More
Available from: Modular SFC, Inc.
Collect more SFC fractions with HPLC-like convenience
Collect up to 24 fractions at atmospheric pressure
Dry fractions while collecting
Use standard glass collection tubes, bottles,...Read More
Available from: Modular SFC, Inc.
Combine collection and drying into a single step

Use stacked and multiple injection collection modes
Eliminate carryover
Increase purity and recovery
Control via CFC-PC™...Read More
Available from: Modular SFC, Inc.
Dry Samples Faster than Vacuum or Blow Down Solutions

No vacuum pump required to dry fractions faster than benchtop vacuum centrifuges or blow down concentrators.*
Save energy,...Read More
Available from: Modular SFC, Inc.
Modular SFC’s CFC™-2x (patent pending) Centrifugal Extract Collector is a bench top accessory for new and existing SFE equipment. The CFC-2x provides researchers and engineers with the ability to...Read More

Related Research You May Be Interested In

The Analysis of 1,4-Dioxane for EPA Method 522 and UCMR 3
This Application Note will demonstrate the extraction of
1,4-Dioxane from an aqueous matrix using Option 1 of
EPA Method 522 for 500 mL initial volume sample. It will
make...Read More
By: Horizon Technology, Inc. | Published: 4/26/2012
Using mass flow controller-based dynamic gas blenders to produce accurate calibration gas
Mass flow devices, developed in the 1960’s, are critical components is systems that produce the specialty gas standards required to calibrate a wide variety of instruments...Read More
By: Environics Inc. | Published: 11/11/2011
ADVERTISEMENT